## Introduction
The AvA-8 buying and selling system is a complete algorithmic buying and selling resolution designed with a number of specialised modules that work collectively or independently to generate buying and selling indicators and handle positions. This handbook covers the 4 fundamental modules: GAMMA, DELTA, EQUALIZER, and PATHFINDER.
## DELTA Module
### Overview
The DELTA module is designed for pattern following and primarily executes purchase orders. It makes use of a multi-level entry method with refined place administration options.
### Key Options
– Multi-level technique with as much as 12 lively buying and selling ranges
– Dynamic lot sizing primarily based on account metrics
– Customizable Take Revenue, Cease Loss, and Trailing Cease
– A number of indicator filters (ADX, RSI, CPR)
– Suitable with numerous buying and selling modes (ON_TICK, ON_PSAR, ON_ADX, ON_ZONE, ON_CPR, ON_ALL_IND)
### Settings
#### Primary Settings
– **Buying and selling Mode**: Determines when DELTA will enter the market (tick-based, indicator-based, and so forth.)
– **Magic Quantity**: Distinctive identifier for DELTA orders
– **ADX Mode**: Filter power for ADX indicator (OFF, WEAK, MODERATE, STRONG, and so forth.)
– **RSI Mode**: Filter sort for RSI indicator (OFF, STRICT, NORMAL, LOOSE)
– **CPR Mode**: Filter settings for Central Pivot Vary (OFF, BASIC, TREND, BREAKOUT, RANGE)
#### Lot Sizing Choices
– **Lot Sizing Mode**: Fastened heaps, money-based, or percentage-based
– **Cash Begin/Step**: Beginning account worth and step measurement for money-based sizing
– **Lot Ratio Begin/Step**: Base multiplier and increment for place sizes
– **Apply To**: Account metric used (Steadiness, Fairness, Free Margin)
– **Lot Proportion**: Proportion of account to make use of when in proportion mode
#### Danger Administration
– **TP Mode**: Take revenue mode (None, Quantity, Proportion)
– **SL Mode**: Cease loss mode (None, Quantity, Proportion)
– **Trailing Mode**: Trailing cease mode (None, Quantity)
– **Trailing Begin Quantity**: Revenue required earlier than trailing cease prompts
– **Trailing Increment**: Step measurement for trailing cease changes
#### Buying and selling Ranges (1-12)
– **Degree Allow**: Toggle for every buying and selling stage
– **Degree Lot Measurement**: Place measurement for particular stage
– **Entry Level**: Distance from earlier stage for entry
– **Take Revenue**: TP goal for the extent
– **TP Comply with**: Whether or not stage’s TP follows increased ranges
### Utilization Suggestions
1. Begin with minimal ranges (1-3) till you perceive the system’s conduct
2. Use ADX filter to commerce solely throughout trending markets
3. For safer entries, allow a number of indicator filters through ON_ALL_IND mode
4. Monitor the DELTA panel within the GUI for standing and place data
5. Modify TP_FOLLOW settings to create a trailing cascade impact throughout ranges
## GAMMA Module
### Overview
The GAMMA module is designed as a counterpart to DELTA, specializing briefly positions. It shares many options with DELTA however is optimized for downward market actions.
### Key Options
– Multi-level technique with as much as 12 lively buying and selling ranges
– Dynamic lot sizing primarily based on account metrics
– Customizable Take Revenue, Cease Loss, and Trailing Cease
– A number of indicator filters (ADX, RSI, CPR)
– Suitable with numerous buying and selling modes (ON_TICK, ON_PSAR, ON_ADX, ON_ZONE, ON_CPR, ON_ALL_IND)
### Settings
#### Primary Settings
– **Buying and selling Mode**: Determines when GAMMA will enter the market (tick-based, indicator-based, and so forth.)
– **Magic Quantity**: Distinctive identifier for GAMMA orders
– **ADX Mode**: Filter power for ADX indicator (OFF, WEAK, MODERATE, STRONG, and so forth.)
– **RSI Mode**: Filter sort for RSI indicator (OFF, STRICT, NORMAL, LOOSE)
– **CPR Mode**: Filter settings for Central Pivot Vary (OFF, BASIC, TREND, BREAKOUT, RANGE)
#### Lot Sizing Choices
– **Lot Sizing Mode**: Fastened heaps, money-based, or percentage-based
– **Cash Begin/Step**: Beginning account worth and step measurement for money-based sizing
– **Lot Ratio Begin/Step**: Base multiplier and increment for place sizes
– **Apply To**: Account metric used (Steadiness, Fairness, Free Margin)
– **Lot Proportion**: Proportion of account to make use of when in proportion mode
#### Danger Administration
– **TP Mode**: Take revenue mode (None, Quantity, Proportion)
– **SL Mode**: Cease loss mode (None, Quantity, Proportion)
– **Trailing Mode**: Trailing cease mode (None, Quantity)
– **Trailing Begin Quantity**: Revenue required earlier than trailing cease prompts
– **Trailing Increment**: Step measurement for trailing cease changes
#### Buying and selling Ranges (1-12)
– **Degree Allow**: Toggle for every buying and selling stage
– **Degree Lot Measurement**: Place measurement for particular stage
– **Entry Level**: Distance from earlier stage for entry
– **Take Revenue**: TP goal for the extent
– **TP Comply with**: Whether or not stage’s TP follows increased ranges
### Utilization Suggestions
1. Use GAMMA along with DELTA for a balanced method to market actions
2. Take into account enabling GAMMA with stricter filters than DELTA for uneven buying and selling
3. For downtrend affirmation, use the ON_ADX or ON_ALL_IND modes
4. Monitor RSI ranges to keep away from getting into throughout oversold situations
5. Use zone filters to enter solely when value is close to provide zones
## EQUALIZER Module
### Overview
The EQUALIZER module is a danger administration system that screens your account metrics and open positions, intervening when essential to guard your account from extreme drawdown or adversarial market actions.
### Key Options
– Actual-time monitoring of account fairness and drawdown
– Automated detection of pattern modifications
– Place balancing and hedging capabilities
– Intervention ranges from monitoring-only to full management
– Compatibility with different modules (DELTA, GAMMA)
### Settings
#### Primary Settings
– **Equalizer Mode**: Operation mode (OFF, MONITOR, PROTECT, FULL)
– **Monitoring Interval**: How usually to test metrics (TICK, 1_MIN, 5_MIN, 15_MIN)
– **Fairness Safety Threshold**: Fairness proportion that triggers safety (e.g., 95%)
– **Most Drawdown P.c**: Most allowable drawdown earlier than intervention
– **Allow Counter Trades**: Whether or not to position hedging trades throughout interventions
– **Max Counter Commerce Quantity**: Most quantity for counter/hedge trades
– **Minimal Revenue Goal**: Revenue required earlier than resolving interventions
– **Max Intervention Trades**: Most variety of trades EQUALIZER can place
### Operation Modes
1. **MONITOR (EQUALIZER_MONITOR)**
– Tracks account metrics and module positions
– Offers visible suggestions by way of the dashboard
– No lively intervention
2. **PROTECT (EQUALIZER_PROTECT)**
– Consists of all monitoring options
– Takes motion when thresholds are breached
– Closes worst positions when essential
– Locations protecting counter trades
3. **FULL (EQUALIZER_FULL)**
– Complete danger administration
– Actively balances publicity between modules
– Locations restoration trades throughout adversarial situations
– Dynamically adjusts take revenue ranges
– Implements superior hedging methods
### Dashboard Components
– **Fairness Standing**: Present fairness as proportion of stability with drawdown
– **Module Exercise**: Lively modules and place counts
– **Internet Publicity**: Steadiness between lengthy and quick positions
– **Standing Indicator**: Present operation standing with alerts
### Utilization Suggestions
1. Begin with MONITOR mode to know the system’s evaluation
2. Use PROTECT mode throughout unstable durations or when testing new methods
3. FULL mode is greatest for skilled customers who perceive the system completely
4. Set cheap thresholds primarily based in your danger tolerance
5. Monitor the dashboard usually to know intervention patterns
## PATHFINDER Module
### Overview
The PATHFINDER module is the system’s sign technology element, figuring out potential market entry and exit factors primarily based on value motion, shifting averages, and market dynamics.
### Key Options
– Separate uptrend (purchase) and downtrend (promote) modules
– Help for a number of order ranges
– Customizable take revenue and cease loss ranges
– Sign visualization on chart with arrows and textual content
– ADX pattern filter integration
– Automated exit on reverse indicators
### Settings
#### Module Management
– **PathFinderBuy_Enabled/PathFinderSell_Enabled**: Allow/disable modules
– **magicNumberPathFinderBuy/magicNumberPathFinderSell**: Distinctive identifiers
– **ExitOnReverseSignal**: Whether or not to shut positions on opposing indicators
#### ADX Filter
– **PathFinderBuy_ADXMode/PathFinderSell_ADXMode**: ADX filter power
#### Order Settings
– **PathFinderBuy_1_Enabled/PathFinderSell_1_Enabled**: Allow first order stage
– **PathFinderBuy_1_Lots/PathFinderSell_1_Lots**: Place measurement for first stage
– **PathFinderBuy_1_TP/PathFinderSell_1_TP**: Take revenue for first stage
– **PathFinderBuy_1_SL/PathFinderSell_1_SL**: Cease loss for first stage
– **PathFinderBuy_2_Enabled/PathFinderSell_2_Enabled**: Allow second order stage
– **PathFinderBuy_2_Lots/PathFinderSell_2_Lots**: Place measurement for second stage
– **PathFinderBuy_2_TP/PathFinderSell_2_TP**: Take revenue for second stage
– **PathFinderBuy_2_SL/PathFinderSell_2_SL**: Cease loss for second stage
#### Visible Settings
– **ShowHistoricalSignals**: Show previous indicators on chart
– **BuyArrowColor/SellArrowColor**: Colours for sign arrows
– **ArrowSize**: Measurement of sign markers
– **ShowTextLabels**: Show TP stage labels
– **ShowSignalLabels**: Present BUY/SELL textual content on chart
### Sign Technology Logic
PATHFINDER generates indicators primarily based on the connection between value motion and shifting averages:
1. **Purchase Sign Situations**:
– Value low MA is above minimal excessive value
– Present shut is above earlier excessive
– Final sign was not a purchase
– ADX filter confirms pattern (if enabled)
2. **Promote Sign Situations**:
– Value excessive MA is under most low value
– Present shut is under earlier low
– Final sign was a purchase
– ADX filter confirms pattern (if enabled)
### Utilization Suggestions
1. Use the visible indicators on the chart to know market dynamics
2. Allow ADX filter to scale back false indicators throughout sideways markets
3. Take into account setting wider cease loss in unstable markets
4. Use TP markers to watch revenue targets and modify handbook exits
5. Overview historic indicators to know the system’s efficiency over time
## Integration Suggestions for All Modules
1. **Balanced Method**:
– Use DELTA for uptrends and GAMMA for downtrends
– Let EQUALIZER handle general danger
– Use PATHFINDER for sign affirmation
2. **Danger Administration**:
– Begin with small place sizes
– Use EQUALIZER’s safety options
– Set cheap take revenue and cease loss ranges
– Monitor drawdown and fairness metrics
3. **Dashboard Utilization**:
– Watch the ADX panel for pattern power
– Examine zone panels for help/resistance areas
– Monitor RSI for overbought/oversold situations
– Overview EQUALIZER standing for account well being
4. **Customization**:
– Adapt settings to your buying and selling fashion and danger tolerance
– Take a look at totally different combos of modules
– Take into account market situations when enabling filters
—
